- Home
- >
- Tienda
- >
- U
- >
- Unid. Potencia Hidráulica
- >
- BOMBA DE AGUA HIDRAULICA STANLEY TP03
BOMBA DE AGUA HIDRAULICA STANLEY TP03
STANLEY TP03.
TP03
- Contenedor y propulsor de uretano liviano y durable
- Sumergible, no se requiere cebado
- Puede funcionar en seco sin daños
- Argolla de sujecion
- Acoples rapidos HTMA
- Descarga de 3 pulgadas
Sé el primero en escribir una reseña “BOMBA DE AGUA HIDRAULICA STANLEY TP03” Cancelar la respuesta
Lo siento, debes estar conectado para publicar un comentario.
Productos Relacionados
MARTILLO ROMPEDOR HIDRAULICO STANLEY BR67130E BR67
MARTILLO DEMOLEDORA MARCA STANLEY BR67 BR67130E
The BR67 is a medium duty tool for work in the 70 – 90 pound class
– It is highly productive in utility construction, street maintenance, repair of water and gas mains, and general contracting jobs
– Easi-Ride™ foot, offered on the BR67 absorbs and controls tool bit bounce, greatly reducing operator fatigue
– Feathering on/off valve controls blow speed, making startup and initial tool placement easy
– Operates on open center system 1-1/8″ shank hex size
– Tool Weight: 72 LBS.
UNIDAD DE POTENCIA HIDRAULICA STANLEY HP8BD
UNIDAD DE POTENCIA HIDRAULICA STANLEY HP8BD.
Application:
- Designed to provide power for hydraulic tools requiring a single 5 gpm up to 8 gpm.
Features:
- Briggs Vanguard engine
- Air-to-oil cooler with high-speed blower
- Manual throttle control
- Lift and latch handle
- 12 inch Foam filled tires
- Low oil pressure shutoff
- Electric start and all-electric controls
- 12 vdc plug on some models
Specifications:
- Engines: 18 hp Briggs
- Output Capacity: 5 or 8 GPM (20 or 30 LPM)
- Length: 36 in. / 91.4 cm
- Width: 23 in: / 58.4 cm
- Height: 29.5 in. / 74.9 cm
- Fuel Tank Capacity: 5.5 gal. / 20.8 liters
- Weight (Wet): 330 lbs (149.6 kg)
- Estimated Gas Consumption Per Hour: 1.3 gal / 4 liters
- Hydraulic Reservoir Capacity: 3 gallons / 11 liters
- Relief Valve setting: 2100 psi / 145 bar
- Max relief setting: 2500 psi / 172 bar
- HTMA/EHTMA Category: Type 1 and 2
- Nominal Pressure: 1500 psi/103 bar
- Max Pressure: 2000 psi/138 bar
- Guaranteed Sound Power Level: 101 dBA
- Measured Sound Power Level: 99 dBA
- Vibration Level: N/A
- Dimensions: 35 in. L x 21.5 in. W x 29 in. H (89 cm L x 54.6 cm W x 73.7 cm H)
DEMOLEDOR ROTOMARTILLO STANLEY HD455310 HD45
Roto-martillo de la serie HD45
El roto-martillo de la serie HD45 de Stanley es una herramienta rotativa de percusión para perforar concreto, mampostería o asfalto usando brocas hexagonales 736 Skil
- Caudal de operación de 7 a 9 gpm (de 26 a 34 lpm)
- Velocidad de rotación ajustable hasta 300 rpm
- Gatillo de encendido/apagado proporcional
- Mangueras flexibles
- Acumulador cargado con nitrógeno
- Control de rotación hacia adelante/atrás
El roto-martillo de la serie HD45 de Stanley es una herramienta rotativa de percusión para perforar concreto, mampostería o asfalto usando brocas hexagonales 736 Skil Caudal de operación de 7 a 9 gpm (de 26 a 34 lpm) Velocidad de rotación ajustable hasta 300 rpm Gatillo de encendido/apagado proporcional Mangueras flexibles Acumulador cargado con nitrógeno Control de rotación hacia adelante/atrás
LLAVE DE IMPACTO HIDRAULICA STANLEY IW16150S DE 1″
LLAVE DE IMPACTO HIDRAULICA DE 1″ IW16150S
Specifications:
- Chuck Type: 1 in. Square Drive
- Weight: 26 lbs
- Length: 14.5 in.
- Width: 4.5 in.
- Hydraulic Pressure: 1500-2500 PSI
- Torque: 500-2500 ft./lbs
- Input Flow Range: 7-12 GPM
- Optimum Flow: 8 GPM
- Porting: -8 SAE O-Ring
- Connect Size & Type: 3/4 in. Male Pipe Adapter
- Motor: Integral STANLEY Hyrevz Gear Motor
- Max Pressure: 2500 PSI
- CE Certified
Reseñas